PDF sticker waybills
Requirements
Printer
All PDF sticker printers supporting the set sticker size can be used. We recommend and have tested the Trophy Thermal Printer.
Activation
To enable this feature on your account, navigate to settings in the left navigation pane. In the shipping sub-menu, enable sticker label printing under waybills.
Follow the printer installation guide below to set up your PDF printer.
Setup and installation
Please note that the installation process may differ depending on your specific printer.
Connection options
USB: Connect the printer to your PC/Mac using a USB cable and power it on.
LAN (if supported): Connect the printer to your local network (LAN) using a network cable and power it on. Make sure your network is configured to automatically assign IP addresses (DHCP) or refer to your printer manual for instructions on how to manually configure your printer’s IP address.
Download installation drivers
Download the installation drivers for your operating system from the website of your specific PDF label printer.
Install and run
Once the installation drivers are downloaded, navigate to the applicable folder and open the label printer file. Complete the installation process by following the prompts.
Set default device/printer
Open your system preferences, navigate to printers and scanners and ensure that the PDF printer is set as your default printer.
Finalising installation
Once the device/printer has been set, log in to your Bob Go account, navigate to shipments and print a PDF sticker waybill.
Print label
After printing your first shipping label, you need to make sure that the alignment of the sticker is correct – in other words, that all the information is visible on the sticker and that nothing is cut off on the sides. If this is not the case, then it will require you to recalibrate the label printer.
Recalibrating the printer
Each printer has different steps to perform a quick calibration. In order to confirm the exact steps to calibrate your specific printer, search for your printer make and model number on Google.
For Trophy Thermal Printer setup assistance, reach out via email
at help@trophythermal.co.za or WhatsApp at 062 692 8235.
Smart shipping suggestion: When applying the sticker label to the parcel, use the entire label and not just the inside peel. This inside peel is signed and used as proof of delivery by some of our courier partners.Related Articles
Sticker waybills
Streamline your shipping with sticker waybills With sticker waybills*, shipping has never been easier. Your parcels not only look snazzier, but your fulfillment process speeds up and makes shipping big volumes a breeze. Instead of printing multiple ...Zebra sticker waybills
Requirements Printer All printers supported by Zebra Browser Print can be used. We recommend and have tested the following models: ZD230, ZD421, ZD220. First shop Bob Shop Stickers Outside: 150mm x 102mm Inside peel: 127mm x 84mm Now available from ...Bulk tools
Bulk tools allow users to perform a range of actions on a batch of selected orders or shipments, significantly increasing operational efficiency and reducing manual workload. To execute a bulk action, choose the specific orders or shipments to which ...Order courier stationery
To order stationery from the couriers, log in to your Bob Go account, go to the Resource hub in the left navigation menu, and select Order courier stationery. Complete the form to place your order.Paperless returns
Please note that this process should be the exception and not the norm. Paperless returns can only be done when booking with The Courier Guy. If your customer is unable to print the Bob Go waybill, then the sender should write the Bob Go waybill ...